Natur Foam Kit For 3d Target Repair, Large

Large foam kit for 3D foam target repair.

How to use:

• Use only in well-ventilated rooms, at the ideal temperature of 18-20° C.
• Only process the products in a clean, dry mixing container with sufficient volume.
• Protect skin and eyes with appropriate clothing. The use of a breathing mask is recommended.
• Prepare the targets in advance by widening and cleaning the holes, and position the targets in such a way that you'll be able to pour the mix in very quickly.
• If the holes are too narrow, there is the risk that the mix will not flow inside; it's recommended to widen the holes to a minimum diameter of 10 cm.
• The next steps should be executed without breaks, because from the moment the liquids are in contact, a chemical reaction starts that can't be stopped.
• The liquids must be mixed in a ratio of 2(A) : 1(B), taking into account the facts that the final volume of the mix should be larger than the volume that has to be filled, and the mix will expand to up to 3 times the initial volume (it depends on room temperature, how intense the mix was, ...)
• Mix the two parts vigorously manually or electrically for 20-30 seconds.
• Carefully, but without delay, pour the material into the holes and cavities to be repaired. The mix will start to expand.
• After about 12 minutes, the reaction of the two substances is complete, and you can remove excess residues from your 3D target.
• After 24 – 36 hours, the material has reached its full hardness.

Volume: 2,85 l

Weight: 3 kg

Brand: Natur Foam